S9/S11/S13/S15 Three Phase Oil-Immersed Type Transformer

Power, Electronic, Lighting, Rectifier, Audio
Core-type Transformer
Cooling Method
Oil-immersed Type Transformer
Winding Type
Two-winding Transformer
ISO9001-2000, UL, ISO9001, CCC
Contact Now
S9/S11/S13/S15 Three Phase Oil-Immersed Type Transformer

S13 / 12kV fully sealed oil immersed power transformer shows the advantages of low loss, low noise and high efficiency, which can achieve good energy saving effect and reduce pollution. Compared with the ordinary oil immersed transformer, the fully sealed transformer cancels the oil conservator. The change of oil volume is automatically adjusted and compensated by the elasticity of the corrugated sheet of the corrugated oil tank. The transformer is isolated from the air to prevent and slow down the deterioration of the oil and the aging of the insulation, thus enhance the operation reliability. Normal operation is maintenance free.

Transformer Structure

1. The transformer core is made of imported high-quality cold-rolled silicon steel sheet, which greatly reduces no-load loss and no-load current. The core is tightly bound to ensure the compactness and reduce noise.
2. The high and low voltage windings are made of oxygen-free copper. The low voltage winding of 500KVA and below is of double-layer cylinder structure, of 630kVA and above adopt double helix or four helix structure. High-voltage winding adopts multi-layer cylinder structure.
3. Dyn11 is used in the transformer connection group to reduce the influence of harmonics on the power grid and improve the quality of power supply.
4. The transformer is a fully sealed structure, with three coats of primer and one coat of finish paint applied on the inner and outer surfaces. The product is salt fog proof, moisture proof and fungus-proofing, beautiful, durable and reliable
5. The measured noise value is lower than the standard and maintenance free under normal operation.


Heavy Duty Cable Seal Sanitary Self-Priming Pumps XINJE Programmable Logic Controller postal bag plastic seal